Makita HR5212C 15 Amp 2 in. SDS-Max AVT Rotary Hammer

Makita HR5212C 15 Amp 2 in. SDS-Max AVT Rotary Hammer is engineered with enhanced Anti-Vibration Technology (AVT. It's a synchronized 3-component system for significantly less vibration. The result of the enhanced AVT is a category-leading vibration rating of 9 m/s². The powerful 15 Amp motor delivers 19.1 Joules (14 ft. lbs.) of impact energy. An added feature is the option of lock-on or trigger-activated in the “chipping only” mode, with a push button start/stop control for more convenient operation. The HR5212C is engineered for a range of concrete applications including drilling/coring through-holes for pipes, setting larger anchors, securing tilt-wall supports, small chipping applications and more. It is ideal for a range of trades including masons, concrete contractors, demolition contractors, plumbers, electricians, sprinkler installers and general contractors seeking a best-in-class rotary hammer.

Features

• Powerful 15 Amp motor delivers 14 ft. lbs. of impact energy to handle the most demanding applications
• Anti-vibration technology (AVT) is a synchronized, 3-component system that more effectively reduces vibration resulting in a low 9 m/s2
• Air actuated counterbalance directs air pressure from the crank and barrel room into the counterbalance cylinders to move counterweight pistons in the opposite direction of the drive piston actively reducing vibration
• Vibration absorbing housing features a spring loaded main handle and upper housing that move independently of the motor and drive mechanism effectively isolating most of the vibration away from the user both at the rear handle and side handle
• Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit
• Lock-on or trigger activation in chipping only "mode with a push button start/stop control for more convenient operation"
• Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
• Soft start suppresses start-up reaction for more control and better accuracy
• LED service light notifies the user approximately 8 hours before the brushes need to be replaced
• LED power light indicates switch failure or cord damage
• Variable speed control dial enables user to match the speed to the application for greater versatility
• Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
• Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
• Automatic brush cut-off protects commentator from damage for longer tool life
• 2-mode operation for chipping only or hammering with rotation
• 1 touch sliding chuck for quick bit changes

Includes

• (1) Depth Rod, HR4013C
• (1) Hammer Bit Grease
• (1) D-Handle
• (1) Straight Handle Assembly
• (1) Straight Handle
• (1) Cloth F/Wiping Oil 
• (1) Accessory Case 

Specifications