Peakworks SA-6402-6 6 ft. E6 Shock Absorbing Single Leg Fall Safety Lanyard with Snap and Form Hooks.
SP (Shock Pack) lanyards are comprised of "tear webbing" which is woven in a manner that allows the webbing to tear when it has a load applied to it. This tearing absorbs a significant amount of downward force under load, reducing injury. This tear webbing is folded and shrink-wrapped into a compact 1 x 2 x 6" (2.5 x 5 x 15 cm) pack that is sewn into the lanyard next to the body connector. Lanyards are engineered products, and the critical connection component between the body harness and the anchor. They are sometimes referred to as connectors. Peakworks lanyards are designed and tested to comply to strict CSA and ANSI standards. The shock absorbing action of these lanyards limits and reduces the force of a fall on the worker, significantly reducing injury to the body.
- Made with a superior grade, heavy-duty 1-3/4" (45 mm) or 1" (25 mm) polyester webbing for maximum strength or 1/4" (6 mm) galvanized plastic coated cable, with tear webbing shock absorber
- A tear-away absorber limits the arrest force to a maximum of 900 lb (4 kN) for the E4 category or 1,300 lb (6 kN) for the E6 category
- Certified to CSA Z259.11-05 standards
|Length/Configuration||6 ft (1.8 m), single leg|
|Hooks||1 snap hook (body), 1 form hook (anchor)|
|Maximum arrest force||1,300 lb (6 kN)|