Peakworks SA-5400-6 6 ft. E4 Shock Absorbing Single Leg Fall Safety Lanyard with Snap Hooks is comprised of “tear webbing” which is woven in a manner that allows the webbing to tear when it has a load applied to it. This tearing absorbs a significant amount of downward force under load, reducing injury. This tear webbing is folded and shrink-wrapped into a compact 1 x 2 x 6″ (2.5 x 5 x 15 cm) pack that is sewn into the lanyard next to the body connector. Certified to CSA Z259.11-17 standards. The shock absorbing action of these lanyards limits and reduces the force of a fall on the worker, significantly reducing injury to the body.
- Made with a superior grade, heavy-duty 1-3/4″ (45 mm) or 1″ (25 mm) polyester webbing for maximum strength or 1/4″ (6 mm) galvanized plastic coated cable, with tear webbing shock absorber
- A tear-away absorber limits the arrest force to a maximum of 900 lb. (4 kN) for the E4 category
- Deceleration Distance: 4 ft. at 220 lb. (Consult chart in manual for DD for lower capacity)
- Certified to CSA Z259.11-17 standards
|Length / Configuration||6 ft. (1.8 m), Single leg|
|Hooks||2 snap hooks|
|Maximum arrest force||900 lb. (4 kN)|