Woodbridge 
Description
*This item is available for pick-up or in-store purchase ONLY at our Woodbridge location. Taxes and PDI extra.
HONDA 110 Gallon 2 in. High Pressure Water Pump is a 50 mm (2 in), high-output, high-pressure pump that can perform a wide range of duties from general water transfer to irrigation. It can even be used with a fire hose nozzle for emergency backup in remote areas. It's powered by a Honda GX160, OHV engine for dependable starts and long life.
Maximum pumping capacity is 500 litres per minute. A convenient carrying handle and hose strainer come standard.
Features
- High output 500 litres per minute (110 Imp. gal. per minute), high pressure (61 psi).
- Honda GX160 OHV engine.
- 50 mm (2 in) suction and discharge ports.
- Uses: General water transfer, high pressure to irrigation.
Specifications
| Water Pump Type | High pressure |
| Pump | Centrifugal |
| Type | Self-Priming |
| Suction Port Diameter | 50.0 mm (2.0 in) |
| Discharge Port Diameter | 50.0 mm (2.0 in) |
| Litres per Minute | 500 |
| Imp. Gal. per Minute | 110 |
| Litres per Hour | 30000 |
| Imp. Gal. per Hour | 6600 |
| Total Head | 43 m (141 ft) |
| Suction Head (Total Lift) | 8 m (26 ft) |
| Priming Time @ 5m(16.4 ft.) | 80 seconds |
| Pump Body | Aluminum |
| Impeller | Cast iron |
| Honda Engine | GX160T2 |
| Type | 4-stroke, OHV, single cylinder |
| Displacement | 163 cc (9.95 CID) |
| Lubrication System | Forced splash |
| Governor | Mechanical centrifugal |
| Starting System | Recoil starter |
| Fuel Tank Capacity | 3.10 L (0.68 Imp. gal) |
| Oil Alert | N/A |
| Drive Unit Type | Direct coupled / mechanical seal |
| Frame Type | Handle type, steel base |
Dimensions and Weights
| Item Length: | 42.5 cm (16.7 in) | Item Width: | 37.5 cm (14.8 in) |
| Item Height: | 40.5 cm (15.9 in) | Item Weight: | 23.5 kg (51.8 lb) |