Item No. 35349
excl. tax
Out of stock Low stock In Stock Inventory may differ at physical stores locations.
Please call ahead for in-store purchase.

The OTTOVAC is a portable electric vacuum lifting device intended to lift and move glass

and any other material with a smooth, flat, and non-porous surface. The OTTOVAC has a built-in pressure sensor with an automatic start/stop function. When the vacuum in the suction cup's base reaches -55 kPa, the pump will automatically stop after a three-second delay. When the vacuum level drops below -55 kPa, the pump will automatically restart, reaching the required pressure during operation.

The OTTOVAC is not intended:

  • To be used for climbing or securing the human body in any way. This product is not designed or intended for climbing or to support a person’s weight. Using this product for climbing or any other unintended purpose may result in injury or death.
  • To lift, move, or place objects of very porous, soft/flexible, and crumbling materials, such as simple cardboard boxes, styrofoam, dry cast pavers, compressed sand, or bad-quality concrete.


Battery:7.4V 2000mah Lithium Ion
Working Voltage:6V
Rated Power:3W
Working Cycle:10000+ (ON/OFF Cycles / 800+hours continuous)
Rated Airflow:4l/min
Maximum vacuum rate:-0.65 bar (-65kPa)
Maximum lifting capacity:150 kg (330lbs)
Working Load Limit:75 kg (165lbs)
Dimensions:200 x 200 x 90 mm
Net weight (w/battery):1.2 kg (2.6lbs)
Working temperature:0-60oC (32-140oF)