DYNA 4441-3.78 HB-2 SATIN SOLVENT BASED ACR.SEALER

Item No. 26357
The DYNA 4441 3.78-L DYNAMATRIX HB-2 Interlocking Pavers and Slabs Satin Finish Solvent Based Protective Sealant is a high end Acrylic Sealant specifically designed to protect and enhance the look of Interlocking Concrete Pavers and Slabs. It penetrates deeply into the substrate for a maximum
Jug
Price
$56.99
price per Jug
excl. tax
View volume discount
This product is temporarily out of stock. Sorry for the inconvenience.
Description

The DYNA 4441 3.78-L DYNAMATRIX HB-2 Interlocking Pavers and Slabs Satin Finish Solvent Based Protective Sealant is a high end Acrylic Sealant specifically designed to protect and enhance the look of Interlocking Concrete Pavers and Slabs. It penetrates deeply into the substrate for a maximum protection against most stains (oil, gasoline, gum, tar, rubber, rust, etc.) while rendering a clear wet look finish.

Carefully blended with thermoplastic resins and refined solvents, Dynamatrix® HB2 Protective Sealant is suitable for use in all weather conditions. It will offer you a rich and durable finish that withstands heat, sun, salts, frost and all aggressive weather elements. It will not peel, delaminate or yellow.

Features

  • HB-2 gives a satin finish
  • Penetrates deeply for better and more durable protection against stains, oil, and dirt
  • Stabilizes the jointing sand
  • Adequate Solids Content for Interlocking Concrete Pavers (20 %)
  • Clear Satin Look Finish, enhances the colors of the treated surface
  • Reduces damages due to freeze-thaw cycles
  • Resists all weather elements (sun, rain, frost, heat, salt, etc.)
  • Will not trap moisture after fully cured
  • Reduces moulds and moss growths
  • Does not peel or yellow
  • For interior and exterior uses (UV stable), it can be applied on colored porous concrete surfaces: Interlocking Concrete Pavers, Stamped or Patterned Concrete, Exposed Aggregate Surfaces, and Natural and Decorative Veneers
  • 150 to 200 square feet per 3.78 L (1 gallon) depending on the surface treated

Specifications

ColourClear, water-like liquid
OdourHydrocarbon
Flash Point> 38 - 50 °C
Specific Gravity.88 g/ml
Application Temperature45 to 95 °F (7 to 35 °C)
Boiling Point150 - 185 °C
Freezing Point
Touch Dry30 to 60 Minutes
Re-Coat2 to 4 Hours
Complete Cure48 Hours
Slip ResistanceExcellent
Hot Tire Pick-Up ResistanceExcellent
FlexibilityExcellent
Chemical ResistanceResists airborne pollutants, oil, yellowing, de-icing salt, acid rain, chlorine
    Loading
    Loading