Home > Building Supplies
Condor EB2200-227 Eagle Econo Plan, Self Leveling Resurfacing Compound Cement 50
Part Number CEMENTECOPLA50LBS
Condor EB2200-227 Eagle Econo Plan, Self Leveling Resurfacing Compound Cement 50
Email a friend    Write a Review
Price
Your Price:  
$22.66
Availability:
In Stock
Quantity Price
70+ $18.03
Quantity
 Add to Gift Registry  Add to Wish List
 Description
Condor EB2200-227 Eagle Econo Plan, Self Leveling Underlayment Compound

EAGLE ECONOPLAN is a semi-rapid, polymer modified, cementitious self-leveling mortar that allows smoothing and leveling of interior concrete floors rapidly with less work. This mortar can be used as an underlayment at thicknesses varying from 2 mm to 25 mm (1/8” to 1”). This compound allows smooth surfaces for installation of carpet, ceramic tiles, natural stone, hardwood, vinyl tiles and resilient floor covering.

SURFACE PREPARATION
  • All surfaces to be cover shall be structurally sound, clean and free from traces of dust, oil, grease, wax, paint, curing agent, coatings and loose particles. They must also be exempt from any trace or presence of acids, concentrated alkalis, chemical cleaning agent or any other material that can reduce adhesion.
  • All concrete substrates shall be completely cured and at least 28 days old. It must be roughened for more adhesion and to remove completely all traces of paint, coating, loosely bonded toppings, loose particles and construction debris.
  • Saturate concrete surface with clean water within few hours before repairs leaving no excess water and apply mortar when surface is dry again. Use of Eagle Prime Plus as primer is a good alternative to concrete water saturation.
  • Ambient surface and product temperature must be superior than 10ºC (50ºF) and lower than 35ºC (95ºF) before the installation and for the first 24 hours.
MIXING
  • In a clean container, pour exactly 5.68 litres of fresh clean water and gradually add 22.7 kg of Eagle Econoplan powder while mixing with a low-speed drill and a mixer.
  • Blend for 2 to 3 minutes scraping recipient walls and paddle to obtain a homogeneous malleable and lump-free consistency is achieved.
  • Slake for 5 minutes and mix again for 1 minute. Apply immediately.
  • Clean working tools and hands with water while product is still fresh.
CURING
  • Protect application from any direct ventilation or heat radiation sources, such as direct sunlight during and after application for a minimum of 24 hours. These conditions could cause micro-cracking.
  • Eagle Plan takes 2 to 3 hours to set, depending on consistency and ambient conditions. Curing time may vary according to temperature and humidity level.
  • Wait 24 hours before light traffic.
PACKAGE
  • This product is available in 50 lbs./ 22.7 kg bag.
  • 70 bags per skid.
STORAGE
  • Store in a dry and fresh area. Shelf life is 12 months in its original non-opened container.


 Customer Reviews Average Rating review  
Homeowner/Confident Do-it-yourselfer!
  The product was easy to mix, went down good, however the end result was much less than impressive. For some reason the product was very bubbly! As it cured the bubbles that did not emerge left bumps in the surface. Now the surface is level, but not a very smooth surface as a result at all. I still have a bit of work left now to get the bumps off before installing the cork floor. Not satisfied at all and will look into alternative products before using this again. Jason
  Reviewed by:  Jason Sewell from My House. on 12/8/2011
Related Items
Stabila 35610 Extendable Plate Level with 2 stand offs 6' - 10'
Stabila 35610 Extendable Plate Level with 2 stand offs 6' - 10'
Your Price: $295.75
On sale: $249.00  
 0 Review(s)
Stanley PHT250C Heavy Duty Hammer Tacker
Stanley PHT250C Heavy Duty Hammer Tacker
Your Price: $30.79
On sale: $24.95  
 0 Review(s)
Stanley 77-255 IntelliSensor, Pro Stud Finder / Sensor
Stanley 77-255 IntelliSensor, Pro Stud Finder / Sensor
Your Price: $24.99
 0 Review(s)
Browse Similar Items
Building Supplies > Cement